Skip to content

Engineer Core Veneer

Wood Veneer Made “Green” and Renewable!

Our Thick Backer/Engineered Veneer is the future of environmentally green, high end veneer core.  It is a special board made of engineered natural long wood fibers designed for bentwood and 3D molded parts.

  • .050″ – .375″ thick
  • Up to 8′ wide and 20′ long
  • Weight densities from hard maple, sweet gum and poplar
  • Color is beige to light tan (similar to maple)
  • Available large sheet sizes to small cut to size pieces
  • Clear, 1 piece, no void 20 foot lengths available
  • Certified Green
  • FSC Available
  • Easy to machine, stain and finish
  • Can be printed, stained and surface finished with UV high wear top coats
  • Laser cuts and H.F. presses with no blowouts (no phenolic)
  • Can easily be punched, die cut, water jet cut or machined leaving nice tight edge
  • Very stable with extremely accurate thickness controls
  • Bendable and flexible (until laminated)
  • Multi layer laminator component parts
  • Excellent for laminating or encapsulating with water resistant, nonslip dry film overlays
  • Bonds/Glues easily with most liquid or dry glue systems
  • Extreme cost, weight, strength ratios begin at approximately 1/8″ thickness